SUPERSEAL™ REACH ROD STUFFING BOX
| 
|
100% STAINLESS STEEL CONSTRUCTION
ERL's SUPER SEAL™ Reach Rod Stuffing Box is completely constructed of 300 series stainless steel. Produced on computer controlled machines to accurately control dimensional quality, the body of the stuffing box is a massive 5" diameter to prevent deformation of the bore from the heat of welding during installation.
VAPOR TIGHT PERFORMANCE
Die cut Teflon™ Packing Rings are designed to fit perfectly in each size Stuffing Box forming an effective vapor tight seal preventing fugitive emissions. The "T" shaped gland draws downward to lightly compress the Teflon™ packing. Two S.S. self-locking nuts maintain the glands compression setting on the packing. A grease fitting on the gland allows the introduction of grease between the reach rod and the bore of the gland. Grease lubrication lubricates while further reducing fugitive emissions. For best long term performance the reach rod should be stainless steel. In any case the reach rods surface must be smooth.
EASY INSTALLATION
ERL stocks the most popular size stuffing boxes, as listed below, other sizes are produced as requested. Standard Stuffing Boxes can be flush mounted, a counterbore also permits mounting on a 2.5" pipe. Other size counterbores, including threaded counterbores, are produced as requested.
AVAILABLE VALVE POSITION INDICATOR
All size Stuffing Boxes are designed to easily accommodate the ERL Valve Position Indicator. Save time and money by installing the Valve Position Indicator and Stuffing Box at the same time. Additionally ERL can provide Handwheels, Stem Adapters, Reach Rods, Couplings and Yokes.
| STUFFING BOX SIZE: | 3/4" | 1" | 1-1/4" | 1-1/2 " | 1-5/8" |
| Thickness of Packing: | 5/16" | 5/32" | 5/16" | 3/8" | 5/16" |
| Number of Rings provided: | 3 | 5 | 3 | 2 | 3 |