Search the Catalog:

Default: searches for each entry separately (case insensitive).

Phrase Search: use quotes (i.e. "alarm panels").

Jump to page: enter page number (i.e. G-12, R-6, G34, r9, etc.).

REACH RODS

Reach Rod with integral square STRAIGHT shank Handwheel adapter with threads.

section image

Reach Rod with integral square TAPER shank Handwheel adapter with threads.

section image

Reach Rod with integral square STRAIGHT shank Handwheel adapter drilled and tapped for mounting bolt.

section image

Reach Rod with integral square TAPER shank Handwheel adapter drilled and tapped for mounting bolt.

section image
  • ERL Reach Rods are all manufactured from 300 series, corrosion resistant, stainless steel for extended service life under all conditions. Full length Reach Rods can be provided, as well as, the easier to install, coupled upper and lower Reach Rods. The Handwheel adapter can be machined integral to the Reach Rod or you can use one of ERL's Stem Adapters if you are looking for the ultimate in installation flexibility. Refer to the drawings above and the Ordering Information Table below when ordering. Take care to preserve the reach rods smooth finish in way of the stuffing box.
section image